Product Data Sheet
ST1132 Pressure Sensitive Data Sheet
This product is a pressure-sensitive foam mounting tape with an aggressive, solvent based rubber adhesive on both sides of a cross-linked EVA/PE co-polymer. The tape is suitable for use on polyethylene, polypropylene and other difficult bond surfaces. The liner is a 60lb Kraft paper. The material bonds well to low energy surfaces, is moisture resistant, and combines good initial tack with high shear and peel strength. Permanent Bond.
|AVAILABLE COLOR(S)||Black or White|
|FOAM DENSITY||5 LBS/Ft|
|TACK @ 72 °F||80+ OZ/IN (FT)||PSTC-5|
|PEEL ADHESION, 15 MIN @ 72°F, 180° ON SS||100+ OZ/IN (FT)||PSTC-101|
|SHEAR ADHESION, @72°F, 1 “ X 1” X 1000G||200+ HRS (NF)||PSTC-107|
|APPLICATION TEMPERATURE||40 to 100F|
|SERVICE TEMPERATURE||-20°f to 165°f|
|SHELF LIFE||1 year|
|RECOMMENDED STORAGE CONDITIONS||Clean, dry area. Out of direct sunlight. 45% – 55 % RH, and 50°f – 80°F|
The information and recommendations set forth herein (“information”) are presented in good faith and believed to be correct at the date of printing. However, the recipient shall be responsible for ensuring the accuracy, completeness and suitability for intended use. In no event will SPECTAPE be responsible for damages of any nature whatsoever resulting from the recipient’s sole reliance upon this information.