Product Data Sheet
ST123 Fiberglass Reinforced Strapping
TYPICAL APPLICATIONS: For light duty strapping, packaging, bundling and palatalizing applications PRODUCT FEATURES: Good adhesion, quick stick and shock resistance • Moisture- and solvent-resistant • Will not split or crack CONSTRUCTION: Overall Grade/Function: Economy Backing: Fiberglass reinforced, cast biaxially oriented polypropylene film Adhesive: Synthetic rubber/resin hot melt APPLICABLE STANDARDS: FDA Indirect Contact CFR 21, 175.105; FDA Indirect Contact CFR 21,177.1520 STORAGE AND USAGE CONDITIONS: Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
|Adhesion to Stainless Steel||70 oz/in width||7.66 N/10 mm|
|Tensile Strength||100 lbs/in width||175.1 N/10 mm|
|Thickness>||4.5 mils||0.11 mm|
|Elongation @ break||3.7%||3.7%|
|Service Temperature Range||-10 F to 150 F||-23 C to 66 C|
The information and recommendations set forth herein (“information”) are presented in good faith and believed to be correct at the date of printing. However, the recipient shall be responsible for ensuring the accuracy, completeness and suitability for intended use. In no event will SPECTAPE be responsible for damages of any nature whatsoever resulting from the recipient’s sole reliance upon this information.
PDS.Cloth Duct Tapes.5-12